LevelOne FGL-2870, Installation Manual

Page: 17 / 60

1-1
Chapter 1: Introduction
Overview
The FGL-2870 switch is a intelligent switch with 24 10/100BASE-T ports, and four
Gigabit combination ports
1
that are comprised of a RJ-45 port and an SFP
transceiver slot. There is also an SNMP-based management agent embedded on
the main board. This agent supports both in-band and out-of-band access for
managing the switch.
This switch provides a broad range of powerful features for Layer 2 switching,
delivering reliability and consistent performance for your network traffic. It brings
order to poorly performing networks by segregating them into separate broadcast
domains with IEEE 802.1Q compliant VLANs, and empower multimedia applications
with multicast switching and CoS services.
Figure 1-1. FGL-2870 Front and Rear Panels
1. RJ-45 ports shared with a SFP tranceiver slots. If an SFP transceiver is plugged in, the
corresponding RJ-45 port is disabled.
10/100 Mbps RJ-45 Ports Console Port
System Indicators
Combination Gigabit Ports
Power Socket
Port Status Indicators