http://www.level1.com
10
LED Indicators:
LED indicators display the network connection and PoE status of the switch.
100BASE-TX Fast Ethernet with PoE Ports (Port 1~8):
These ports are with passive PoE capabilities, and will supply power to the connected PoE
device under the control of the web management. This feature allows users to freely and
safely mix legacy and PoE compatible devices on their network.
All the 8 ports support network speeds of either 10Mbps or 100Mbps, and can operate in half-
and full- duplex transfer modes. These ports also support the automatic MDI/MDIX
crossover detection function to provide “
plug and play
” capability.
Reset Button
The Reset button is used to reset all the setting back to the factory default values. Make sure
that all the settings of the switch are taken down, or all the previous settings will be erased
after pressing the “
Reset
” button.
The Rear Panel
The 3-pronged power plug is placed at the rear panel of the switch shown as below.
