http://www.level1.com
8
2 Features
The POE SWITCH web smart PoE switch is equipped with an 8-port RJ45 connector for Fast
Ethernet, and the corresponding LED indicators for each port. In addition, a built-in push
button is provided for default reset, which is useful to reset back to the default IP address,
user ID, and password. The features are as the following
RJ45 x 8 for WAN and LAN ports with PoE capability
Max. 15Watt (optional 30Watt) per port basis
Passive power compatible with IEEE802.3af and 802.3at PoE devices
Networking configurations by Web Management
16+1 LED Indicators: LAN, PoE (for 8 ports) + PWR (for system power)
Built-in push button for default reset
AC power on/off switch
OVP, OCP, OTP protections
2.1 Power on Switch
The POE SWITCH is equipped with an internal power supply to operate with 100~240 VAC,
50 ~ 60 Hz. The AC power cord connector is at the rear panel next to the power on/off
switch. Turning on the power switch, it will first perform “
self-diagnostic
” test, and take
about 10 seconds to complete the process.
2.2 LED Indicators
LED Status Table
LED
Status
Descriptions
PoE
ON
The PoE function is enabled.
OFF
The PoE function is disabled.
Power
ON
System power is on.
OFF
System power is off.
10/100M
ON
LAN Port is in connection.
OFF
No Ethernet connection.
Flashing
Data is transmitting or receiving
