http://www.level1.com
48
4.11 Trunk Setting
Trunk setting is used to set trunk group for load balance and auto-backup. The switch
supports two trunk group, and each trunk consists of 2~4 ports. Trunk hash algorithm can be
selected according to 4 different options.
Port ID:
Among the trunk member ports, the packet will be distributed based on the port
ID.
SA:
Among the trunk member ports, the packet will be distributed based on the
source MAC address.
DA:
Among the trunk member ports, the packet will be distributed based on the
destination MAC address.
DA&SA:
Among the trunk member ports, the packet will be distributed based on the XOR
result of the source MAC address and the destination MAC address.
