LevelOne FCS-3021 User Manual Download Page 69

Page: 69 / 113

Maintenance

Five actions can be selected.

“Reboot system”

Click the reboot button to restart system.

“Restore”

Click it to restore all setting to factory default except setting in “Network type” in

network page.

“Factory default”

Click on Factory default button on the configuration page to restore the factory

default settings. Any changes made so far will be lost and the system will be reset to the initial
factory settings. The system will restart and require the installer program to set up the network
again.

“Upgrade firmware”

Select the firmware file and click upgrade button.

<url>

http://<Network Camera>/setup/maintain.htm

<Network Camera> is the domain name or original IP address of the Network Camera.

Summary of Contents for FCS-3021


















































































































Search results

Summary of Contents for FCS-3021

Reviews:

Related manuals for FCS-3021

Brands by name

Popular brands

LevelOne FCS-3021, User Manual

Search results

Summary of Contents for FCS-3021

Reviews:

Related manuals for FCS-3021

Brands by name

Popular brands