LevelOne FCS-3021, User Manual

Page: 60 / 113

<Network Camera> is the domain name or original IP address of the Network Camera.
Event
“Event name”
The unique name for event
“Enable this event”
Check it to enable this event.
“Priority”
The event with higher priority will be executed first.
“Delay second(s) before detecting next event”
The delay to check next event. It is used in
motion detection and digital input trigger type.
There are four kinds of trigger supported.
“Video motion detection”
Select the windows which need to be monitored.
“Periodic”
The event is triggered in specified intervals. The unit of trigger interval is minute.
“Digital input”
To monitor digital input
“System boot”
The event is triggered when the system boots up.
The weekly and time schedules are provided.
“Sun” ~ “Sat”
Select the days of the week to perform the event.
“Time”
show
“Always”
or input the time interval.
The default action is triggering DO. If there are servers configured, the user can select them from
“Server name”
, too.
“Trigger DO”
Check it to trigger digital output for specific seconds when event is triggered.
“Server name”
Check it to sending the selected media when event is triggered.