LevelOne FCS-3021, User Manual

Page: 62 / 113

Here is setting for FTP server.
“Server address”
The domain name or IP address of the external FTP server.
“Server port”
This can be other than the default port 21. The user can change this value from
1025 to 65535.
“User name”
This granted user name on the external FTP server.
“Password”
This granted password on the external FTP server.
“Remote folder name”
Granted folder on the external FTP server. The string must conform to
that of the external FTP server. Some FTP servers cannot accept preceding slash symbol before
the path without virtual path mapping. Refer to the instructions for the external FTP server for
details. The folder privilege must be open for upload.
“Passive Mode”
Check it to enable passive mode in transmission.
Here is setting for HTTP server.
“URL”
The URL to upload the media.
“User name”
This granted user name on the external HTTP server.
“Password”
This granted password on the external HTTP server.
Here is setting for network storage. Only one network storage is supported.
“Network storage location”
The path to upload the media
“Workgroup”
The workgroup for network storage.
“User name”
This granted user name on the network storage.
“Password”
This granted password on the network storage.
After input the setting of server, user can click on to test whether the setting is correct. The
testing result will be shown in a pop-up window.