25
Motion Detection Alerts
The
Motion Detection
feature can generate an Alert when motion is detected.
The FCS-0020/WCS-0020 will compare consecutive frames to detect changes caused
by the movement of large objects.
But the motion detector can also be triggered by:
•
Sudden changes in the level of available light
•
Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in locations
where there is good steady illumination, and the camera is mounted securely. It
cannot be used outdoors due to the sensitivity of the CMOS sensor.
To Use Motion Detection Alerts
Using the Web-based interface on the FCS-0020/WCS-0020, select the
Motion
Detection
screen, then configure this screen as described below.
Figure 12: Motion Detection
1.
Enable
the
Motion Detection
feature.
2.
Set the area or areas of the video image to be examined for movement. You can
define up to 4 areas, and set the motion threshold individually for each area.
3.
If using a schedule, define the desired schedule in
Event Trigger
screen.
4.
Save your changes.
5.
Select
the
screen to have alerts sent by E-mail:
•
Enable and enter at least one (1) E-mail address
•
Select or enter the desired options for
Video
Attachment
,
Show
"
From" as
and
Subject
fields.
•
Enter details of the SMTP Server used to send the E-mail.
Summary of Contents for CamCon WCS-0020
Page 2: ......
Page 4: ......
Page 49: ...43 Clear Button Use this button to clear the input fields ready to add a new user...