4
The sensor also is not intended for level measurement on the gauge-pipe and the
container wall with antistatic treatment (partially electrically conductive).
u
NSuiTablE
raNgE
OF
aPPliCaTiON
The sensor is installed on a clean
and degreased surface of the ve-
ssel wall. The attachment is done
by doublesides adhesive layer.
Orientation of the sensor can be
arbitrary. Maximum thickness of the
vessel wall depends on the detec-
ted medium (see technical data),
the maximum is 8 mm.
The sensor is fixed to the gauge
pipe or tube by means of two
plastic straps (2.5 mm width). The
cable should be vertically down-
wards oriented. The maximum wall
thickness of the tube depends on
the detected medium (see technical
data), the maximum is 8 mm.
Plastic straps
1.
i
NSTallaTiON
a)
The
sensor type
NC30-10
,
which is intended to point level
detection on
plastic or glass and gauge-tubes.
P
rOCEdurE
FOr
PuT
SENSOr
iNTO
OPEraTiON
b)
The
sensor type
NC30-11
which is intended to thru-wall level
sensing of liquids in
plastic or glass vessels with lat walls.
