Display and control panel
Leuze electronic
LSIS 4xx
i
49
TNT
35/7-2
4
V
Network configuration
Information on network configuration can be found in chapter "Commissioning and configu-
ration" on page 36. If you need to set the IP address of the LSIS 4xx
i
via the display, proceed
as follows:
Changing the network settings on the display
Parameter
Parameter handling
Display settings
Program selection
Ethernet
In the Parameter menu, use the
buttons to select the
Ethernet
menu item.
Press the enter button to enter the
Ethernet
menu.
Ethernet
o Ethernet 1
Press the enter button again to enter the
Ethernet 1
menu.
Ethernet 1
IP address
Gateway
Net mask
DHCP activated
Use the
buttons successively to select the
IP address
,
Gateway
and
Net mask
menu items and
set the desired values or activate the DHCP function.
Exit the
Ethernet 1
menu with the ESCAPE button.
Configuration changed:
System must be
restarted
ok
cancel
The message shown at the side appears. Confirm with
OK
to initiate a restart and to activate the changed
configuration.
ESC
