Display and control panel
Leuze electronic
LSIS 4xx
i
50
TNT
35/7-2
4
V
Check program selection
During running operation of the LSIS 4xx
i
, you can simply change the check program via the
display. Prerequisite for this is that multiple check programs were set up previously via
webConfig.
Parameter
Parameter handling
Display settings
Program selection
Ethernet
In the Parameter menu, use the
buttons to select the
Program selection
menu item.
Press the enter button to enter the
Parameter handling
menu.
Program selection
o Blob
Program 2
Program 3
…
In the Program selection menu, use the
buttons to
select the desired check program.
Press the enter button to activate the check program.
A selected program is immediately activated by pressing
the enter button. If, however, a test cycle is currently being
executed at this moment, this test cycle is executed to
completion and evaluated.
As the new check program is being activated, the green
"PWR" LED flashes.
Press the ESC button twice to return to the main menu.
ESC
ESC
