manualshive.com logo in svg

Leuze electronic LSIS 222, Technical Description, Page: 8 / 95

Share
Download
Leuze electronic LSIS 222 Technical Description Download Page 8

General information

6

Technical description LSIS 22x

Leuze electronic

1

General information

1.1

Explanation of symbols

The symbols used in this technical description are explained below.

Attention!

This symbol precedes text messages which must strictly be observed. Failure to comply
with this information results in injuries to persons or damage to the equipment.

Notice!

This symbol indicates text passages containing important information.

1.2

Declaration of Conformity

The code readers of the LSIS 22x series have been developed and manufactured in
accordance with the applicable European standards and directives.

Notice!

You can find the Declaration of Conformity of the devices in chapter 13.1 on page 83.

The manufacturer of the product, Leuze electronic GmbH & Co. KG in D-73277 Owen,
possesses a certified quality assurance system in accordance with ISO 9001.

 

UL

US

C

LISTED

Summary of Contents for LSIS 222
































































































Reviews:

No comments