manualshive.com logo in svg

Leuze electronic LSIS 222, Technical Description, Page: 56 / 95

Share
Download
Leuze electronic LSIS 222 Technical Description Download Page 56

Configuration using configuration codes

54

Technical description LSIS 22x

Leuze electronic

7.5.5

Interleaved 2/5 code selection 

By reading one of the following configuration codes, reading of the 

Interleaved 2/5

 code

type is activated or deactivated. In addition, it is possible to configure the number of digits
that are to be read (value range for number of digits: 2 … 80, factory setting: 4 … 80). 

Also optionally configurable is the check-character evaluation and output.

Figure 7.27: Configuration codes for activating/deactivating the Interleaved 2/5 code type

Notice!

To set the minimum or maximum number of digits, please first read in the above configura-
tion code and then the digits for the desired number of digits (see "Programming codes for
the configuration" on page 92). Conclude parameter entry by reading in the 

Save

 program-

ming code.

Read code type Interleaved 2/5 ON

Read code type Interleaved 2/5 OFF

Interleaved 2/5 - standard settings

Interleaved 2/5 - minimum number of digits

Interleaved 2/5 - maximum number of digits

Summary of Contents for LSIS 222
































































































Reviews:

No comments