Connecting to a PC – Sensor Studio
Leuze electronic
CSL 710
75
Figure 11.4: Graphical visualization: Beam-stream display
11.4.5
DIAGNOSIS
function
The
DIAGNOSIS
function offers the following commands.
• Reset device, i.e., restart the connected light curtain
• Store configuration in non-volatile memory (see chapter 11.4.3)
11.4.6 Exiting
Sensor Studio
After completing the configuration settings, close the
Sensor Studio
configuration software
Exit the program via File > Exit.
Save the configuration settings as a configuration project on the PC.
You can open the configuration project again at later time via File > Open or via the
Sensor Studio
Project
Wizard (
).