2018/06
Technical data
Optical data
Throughbeam
principle
Scanning principle
Operating range/scanning range
1)
1) Range/scanning range depending on the fiber optics used
Up to 1700mm
Up to 450mm
Light source
LED (modulated light)
Wavelength
660nm (visible red light)
Timing
Readiness delay
≤
500ms
Signal range
Extra High Speed
(XHS)
2)
2) The modes
Extra High Speed
(response time 10μs) and
High Speed
(response time 15μs) are only available in
models without IO-Link interface
High Speed
(HS)
2)
Speed
(S)
Long Range
(LR)
Extra Long Range
(XLR)
Response time
10μs
15μs
50μs
250μs
1000μs
Switching frequency
3)
3) With a duty cycle of 1:1
50kHz
33kHz
10kHz
2kHz
0.5kHz
Display area (digits)
0 … 4000
0 … 4000
0 … 4000
0 … 9999
0 … 9999
Electrical data
Operating voltage U
B
4)
4) For UL applications: use is permitted exclusively in Class 2 circuits according to NEC
12 … 24VDC ± 10%
Residual ripple
≤
10% of U
B
Open-circuit current
≤
40mA @ 24VDC
Switching output
…/4…
…/2…
Pin 4/bk:
PNP
Pin 4/bk:
NPN
…/L4…
Pin 4/bk:
IO-Link SIO mode, Push-pull
(PNP light switching, NPN dark switching)
Pin 4/bk:
IO-Link COM2 mode
Pin 2/wh: PNP dark switching
Function
Light/dark switching, adjustable by means of a switch
Switching output time functions
Switch-on/-off delay,
passing contact (on actuation or fall-back),
(combinations are limited
Combinations of timing functions
)
Adjustable times (time functions)
0 … 9999ms
Signal voltage high/low
≥
(U
B
-2.5V)/
≤
2.5V
Output current
≤
100mA
Sensitivity
Adjustable using the teach function or
+
/
-
buttons
Indicators
Yellow LED
Switching output active
Display
2 x 7-segment LED, 4-digit,
Red:
signal strength,
Green:
switching threshold
Mechanical data
Housing
ABS/PC black/red, transparent PC cover
Weight
50g with M8 connector,
63g with 2000mm cable
70g with 150mm cable and M12 connector
Connection type
M8 connector, 4-pin, or
2000mm cable, 4 x 0.25mm
2
, or
150mm cable with M12 connector, 4-pin
Fiber optic connection
Clamp-mounting, 2 x Ø 2.2mm
Environmental data
Ambient temp. (operation/storage)
-10°C … +55°C/-20°C … +85°C
Protective circuit
5)
5) 2=polarity reversal protection, 3=short circuit protection for all outputs
2, 3
Degree of protection
IP 50, NEMA 1
Standards applied
EN 60947-5-2
Certifications
UL 508, C22.2 No.14-13
4)
6)
6) These proximity switches shall be used with UL Listed Cable assemblies rated 30V, 0.24A min,
in the field installation, or equivalent (categories: CYJV/CYJV7 or PVVA/PVVA7)
Additional functions
Sensor adjustment
Menu-driven using display and rocker push button
Notes
Explanation of the
signal ranges
Extra High Speed (XHS)
1)
:
Shortest response time; short-
est operating range;
display area 0 … 4000
High Speed (HS)
1)
:
Very short response time;
short operating range;
display area: 0 … 4000
Speed (S)
:
Short response time and range
suitable for many standard
applications; display area
0 … 4000
Long Range (LR)
:
Good response time; long
operating range; display area:
0 … 9999
Extra Long Range (XLR)
:
Longest response time, lon-
gest operating range, display
area 0 … 9999
NOTE
Detailed specifications on the range/
scanning range are enclosed in the
data sheets of our fiber optics type
KF
,
KFX
or
GF
.
1) only available in devices
without IO-Link interface
Observe intended use!
This product is not a safety sensor
and is not intended as personnel
protection.
The product may only be put into
operation by competent persons.
Only use the product in accor-
dance with its intended use.
NOTE
A separate data sheet with supple-
mentary information on operation
and configuration via IO-Link is avail-
able for the
amplifier with IO-Link
.
You can find this in the Download
area on the product page of the
amplifier at
www.leuze.com
.
LV463.XV
