background image

06 

ASSEMBLING YOUR 
GLOW RINGS 

The small pipe extender and coupler (received in 
the Glow Rings box) should be placed at the top of 
the pipe stack, closest to the diffuser. 

Note: Pipe 

extensions and couplers are only needed for 24-, 30- 
and 36-plant Farmstands. 36-plant Farmstands will 
need two pipe extensions and two couplers. 

Remember to put the diffuser cap on and then the  
lid can attach to the top Glow Ring™.

After the Glow Rings are assembled, run the power 
supply cord through the second hole in the fill port 
gasket. If there is a temporary plug in that hole you 
will need to remove it. 

When you lock the gasket into 

place make sure there is enough cord slack so it goes 
down before going up the center of the farmstand.

7

8

Diffuser

Pipe Coupler

Glow Ring™ 

Pipe Extension

Pump

Power Supply

Gasket

Cord Slack

9

If the gasket that came with your Farmstand does not have two 

holes, contact us at [email protected] for a replacement.

07

WHEN TO GE T 
GLOWING

You will have two timers: one for your Glow Rings and one 
for your water pump. The watering cycle will be different 
when the Glow Rings are on than when they are off so it’s 
important to make sure the timers are synced to the same 
time. Make sure the arrow is lined up to the current time of 
day on both your water pump and Glow Rings timer. 

You get to decide when it is daytime for your plants! In the 
timer image to the right we have the 14 hour light cycle on 
during the night (dark side of the dial). This way the lights 
will be less intrusive during the day, however, you can 
always choose a time that better fits your schedule.

View the light cycle timer setting for each Glow Ring size in 
the table below.

The Farmstand’s watering cycle will be different when the 
Glow Rings are on than when they are off because seedlings 
do not need as much water or nutrients when the Glow 
Rings are off. Use the ‘Lights On (Day)’ watering cycle when 
your lights are on and the ‘Lights Off (Night)’ watering cycle 
when your lights are off. View the watering cycle for Glow 
Rings in the table below. 

WATERING CYCLES

LIGHTS ON 

(DAY)

LIGHTS OFF 

(NIGHT) 

TIMER SETTINGS

ON      OFF

ON     OFF

Indoor

15       45

15      120

GLOW RINGS TIMER SE T TINGS

WATER CYCLE TIMER SE T TINGS

TIMER SETTINGS*

LIGHTS ON 

(DAY)

LIGHTS OFF 

(NIGHT) 

2-4 Glow Rings

14 HR

10 HR

5 Glow Rings

15 HR

9 HR

6 Glow Rings

17 HR

7 HR

*Timer settings are a recommended starting point. You 

may need to adjust the settings based on the natural light, 

temperature, and Farmstand location within your home. 

Note: This example displays the setting for 

2-4 GLOW RINGS. 

Each notch represents 15 minutes on the timer.

Dial

Night

ON

OFF

Need help? Call or text (512) 234-4001 

Need help? Call or text (512) 234-4001 

Reviews: