Letscom LC-SW01, User Manual, Page: 14 / 17

25 26
t$IFDLUIF#MVFUPPUIPGUIFXBUDIUPNBLFTVSF#MVFUPPUIJTPO
t$IFDLUIF#MVFUPPUIPGUIFNPCJMFQIPOFUPNBLFTVSF#MVFUPPUIJT
on.
t4FBSDIUISPVHI"11SBUIFSUIBOUISPVHITFUUJOHTPGUIFQIPOF
Bluetooth system.
t.BLFTVSFUIFEJTUBODFCFUXFFOXBUDIBOEUIFNPCJMFQIPOFBSF
close enough.
If you use the iPhone, you need to confirm that connect the watch
to the phone in the APP rather than connect it in phone's
Bluetooth setting:
. Enter the phone Bluetooth setting interface and make sure the
phone Bluetooth is not connected with the watch Bluetooth
. If the phone Bluetooth is connected to the watch Bluetooth, you
will need to unbind the watch first and then rebind it in the APP.
If you still cannot find the watch Bluetooth, you can try the
following methods:
t5VSOPòUIFQIPOF#MVFUPPUIBOESFPQFOUIFQIPOF#MVFUPPUI
t-POHQSFTTUPDMPTFUIFXBUDI#MVFUPPUIBOESFPQFOUIFXBUDI
Bluetooth.
t$MFBSPò"11BOESFPQFOJU
t3FTUBSUUIFQIPOFBOESFPQFO"11UPTFBSDI
t-POHQSFTTUIFTJEFCVUUPOGPSTFDPOETSFTFUUIFXBUDIBOEUVSO
it on again. Note: the data stored in the watch will be cleaned up.
4. Does not have incoming call notification with Android APP?
There may be a mobile phone and watch are not in place, you can try
the following methods:
1) Make sure Android APP and watch Bluetooth is connected.
2) The reminder switch in the APP is already open.
3) Phone system settings - System security - The APP notification has
been allowed in the notification usage authorization.
4) Phone System Settings - Rights Management - APP permissions
have been granted to phones contacts.
5. Does not have incoming call notification with IPhone?
There may be a mobile phone and watch are not in place, you can try
the following methods:
1) Make sure IPhone APP and watch Bluetooth is connected.
2) The reminder switch in the APP is already open.
3) Mobile System Settings - Notification Administration Permissions
have been granted to APP.