DISTANCE: Sets the distance of the Virtual Mic from the Virtual Rotating Elements.
“0” represents the closest position, “10” represents approximately 3 feet away.
RISE & FALL: (Ramp Up/Down) Each of the 3 Rotary Cabinet Profiles has its own
Rise and Fall speeds that are accurate to the actual Leslie model it is based on. You
can increase or decrease these speeds, preserving the individual high/low ratios.
-5 is Slower and +5 is faster. At the center position, the rise and fall time setting is
consistent with that of the actual Leslie model selected by CABINET.
OVERDRIVE: This control adds a modeled vacuum tube-style overdrive to the
sound. Use a small amount for “warmth” and greater amounts for “crunch.”
NOTE: The Leslie Pedal overdrive is true to the character of a vintage Leslie
speaker, primarily used for Hammond organs. It is not intended to create high-gain
distortion more typical in modern guitar amplifiers. You may wish to provide another
such overdrive device for those applications, somewhere in the signal chain prior to
the Leslie pedal.
5.
6.
7.
The LESLIE PEDAL provides all the real-time controls needed to tailor the exact
LESLIE effect you desire.
6 haMMOND Usa
cONtrOls
