BYPASS (FOOTSWITCH): True Bypass, passing the signal through the unit
without effect or coloration. NOTE: If you are connected with a MONO cable, the
Leslie Effect will be output in Stereo, but in BYPASS mode, only the Left Channel
will be output. When the pedal is in BYPASS mode, left_in goes to left_out and
right_in goes to right_out. No bleeding or cross-connections (it is a hard wired,
true bypass).
BRAKE (FOOTSWITCH): Pressing this button Decelerates the Virtual Rotors to
full stop. The Deceleration is a fixed value, and the Virtual Rotor’s positions at rest
will stop at Center. A convenient feature compared to physical Leslie that will stop
arbitrarily.
SLOW/FAST (FOOTSWITCH): Toggles between “SLOW” (or “Chorale”) and
FAST (or “Tremolo”) Virtual Rotor Speeds. The accompanying lights indicate the
Virtual Rotor’s status.
GAIN (On Rear Connector Panel): Engaging this switch will boost Output gain by
11.
12.
13.
14.
8 haMMOND Usa
cONtrOls
