Leroy Merlin J1G-ZP2A-190, Assembly, Use, Maintenance Manual

Page: 110 / 118

109
EN
7. When cutting long pieces of timber, support the opposite end of the timber with the side
support bars, a roller stand or a work surface that is level with the saw table.
8. Before turning on the saw, perform a dry run of the cutting operation to check that there
are no problems such as a clamp interfering with the cutting action.
9. Hold the operating handle (3) and firmly and squeeze the switch trigger (16). Allow the
blade to reach maximum speed and press the switch lock (17)to left; slowly lower the
blade into and through the workpiece.
10. Release the switch trigger (16) and allow the saw blade to stop rotating before raising
the blade out of the workpiece. Wait until the blade stops before removing the workpiece.