Leroy Merlin J1G-ZP2A-190, Assembly, Use, Maintenance Manual

Page: 101 / 118

EN
100
• Damage to the lungs if an effective dust mask is not worn.
• Damage to hearing if effective earmuffs are not worn.
The tool must be used only for its prescribed purpose. Any use other than those mentioned
in this Manual will be considered a case of misuse. The user and not the manufacturer shall
be liable for any damage or injury resulting from such cases of misuse.
The manufacturer shall not be liable for any changes made to the tool nor for any damage
resulting from such changes.
Even when the tool is used as prescribed it is not possible to eliminate all residual risk
factors. The following hazards may arise in connection with the tool’s construction and
design:
For your own safety read instruction manual before operating mitre saw. Wear
eye protection. Keep hands out of path of saw blade. Do not operate saw
without guards in place. Do not perform any operation freehand. Never reach
around saw blade. Turn off tool and wait for saw blade to stop before moving
workpiece or changing settings. When changing the blade, replace and secure
all guarding to its original position and correctly before starting tool.
Disconnect power (or unplug tool as applicable) before changing blade or
servicing. Do not expose to rain or use in damp locations. To reduce the risk of
injury, return carriage to the full rear position after each crosscut operation.
WARNING!