background image

CARE & MAINTENANCE

Use only a soft and dry cloth to clean the outside parts of the clock. Dust 
and particles contained in the cloth could scratch parts. Do not use any 
kind of cleaning products to wipe the clock. 

It is recommended to keep the clock distant from any source of heat or 
vibrations. Do not permanently expose the clock to direct sun light, in hu-
mid or dusty place.                                                                                                                                      

Our clocks are developed to ensure optimal accuracy and reliability. It is 
well accepted for a fine mechanical clock to have a few seconds variation 
per day and our clocks are set so as not to delay. However if you should 
notice a wider variation, please contact an authorized dealer who will advise 
you, or L’Épée 1989 technical support center which will proceed with the 
necessary adjustment.                                                                                                                   

As for all horological pieces of art, it is recommended to periodically service 
your clock. 

A mechanical masterpiece requires fine oils for the lubrication of the mo-
vement. They are deteriorating  with the time. We therefore advise to have 
the movement serviced every five years. Never try to clean the movement 
or the hands.

Summary of Contents for LE DUEL PERPETUEL TOURBILLON

















Reviews: