a grounded electrical outlet to work properly. Connecting to non- grounded
electrical outlet, the TVSS will not be able to properly protect your
electrical equipments.
1.4 The TPS-series TVSS is for indoor use only. Install the TVSS in dry place with
good ventilation, low humidity, no chemical particles and no inflammable
substances. Avoid installing the TVSS near radio transmission station, heat
dissipation equipments or directly to sunlight.
INTRODUCTION
Natural phenomena such as thunderstorm, lightning and the START-STOP
of the high power motorized equipment such as air conditioner, washing
machine, printer, all are the common causes of transient voltage or surge. It can
be considered a transient with voltage levels greater than 2,000 V and current
levels greater than 100 A within 1 - 10 microseconds. The effects of surge cause
electronic equipment and telecommunication equipment damage, operate
incorrectly, shorten their equipment lives f or lose data.
LEONICS TPS-series Power Line and Signal Surge Protector is a transient
voltage surge suppressor (TVSS) or surge protector which reduces voltage of
medium transient surge, filters noise in building cables and protects transient
surge which induced into data cables and signal cables such as telephone cable,
ADSL cable, LAN cable, RS-232 cable, RS-485 cable and etc. It is applicable for
location in Category A and B for indoor point outlets or specific electrical
equipment.
Feature
- 6 surge protection outlets and 2 surge protection channels for
communication or network system
- LED indicators show operating status
- Accordance with ANSI/IEEE C62.41-1991 and ANSI/IEEE
C62.42-2000
- Compact, light weight and easy to install
TVSS POWER STRIP
Power Line and Signal Surge Protector
LEN.MAN.SUR.128 Rev.1.00/2007
TPS-series
TVSS Power Strip TPS-series
Power Line and Signal Surge Protector
SAFETY INSTRUCTIONS
Please read carefully and follow this LEONICS TPS-series Power Line and
Signal Surge Protector guide.
Important: Please keep this manual for reference in order to use the TPS-series
Power Line and Signal Surge Protector properly and safely. This
user’s guide contains instructions for installation and operation
and part descriptions.
If there are any symptoms of problems which are not mentioned in this
guide or any queries, please contact your LEONICS local distributions, LEONICS
Service Center, send e-mail to [email protected] or visit www.leonics.com.
For your convenience and quick reference for LEONICS TPS-series
Power Line and Signal Surge Protector service, please fill the
requested information in the blanks below.
LEONICS TPS model : _________________________________
Serial number : _______________________________________
Purchase date : _______________________________________
Purchase from : _______________________________________
1.1 Read this TPS-series user’s guide carefully before installation and
operation.
1.2 The TPS-series TVSS, which is mentioned in this user’s guide, is designed
for single phase electricity system only.
1.3 To achieve the maximum performance, the TVSS must be connected to
