Leofric Building Systems FAIRFORD SHED Instruction Manual Download Page 12

Page: 12 / 13

Leofric Building Systems - Fairford Shed Instruction Manual

Page 11

Step 5

NOW you are ready to attach your

ROOF SHEETS

. Place your roof sheets one at a time making sure you

have

ADJUSTABLE OVERHANG

either side and that they are square, and fix them as required using the

WASHERS

and

CAPS

supplied.

Roof Sheets

WARNING:

Whilst fixing roof sheets, a ladder

or duck-boards must be used to avoid damage.

Observe utmost caution when working on roof

sheets which are wet or frosty.

No8 x 65 round head screw

and

sela washer

and

cap

to be used to fix the roof sheet. Lay the first roof

sheet against the back front fascia with the same overhang each side fix, to timber roof battens with

No8 x 65

round head screw

, screws evenley spaced.

Lay the rest of the roof sheets along the roof with a minimum of one overlap, fix in the same way as before.

Fixing

When the fascias are securely fixed, place the sheets on the roof structure.

Mark accurately the position of all fixing holes on the roof sheeting for intermediate purlins.

Fix all screws complete with plastic sealing washers in the positions shown,

tightening suffiiciently to seat the plastic washer firmly over the corrugations.

Summary of Contents for FAIRFORD SHED














Search results

Summary of Contents for FAIRFORD SHED

Reviews:

Related manuals for FAIRFORD SHED

Brands by name

Popular brands

Leofric Building Systems FAIRFORD SHED, Instruction Manual

Search results

Summary of Contents for FAIRFORD SHED

Reviews:

Related manuals for FAIRFORD SHED

Brands by name

Popular brands