Leofric Building Systems - Fairford Shed Instruction Manual
Page 12
Bolt a metal bracket
(S89)
to the top and bottom
of the rear corner panel at which the downpipe
is to be fitted - special holes are provided for this
purpose.
Attach one plastic pipe clip to the barrel of the
downpipe at a position corresponding to the
top metal bracket and a second clip to the shoe,
which slots over the bottom of the downpipe.
Offer up the downpipe to the gutter outlet and
secure to the previously placed metal brackets
via the plastic with one
seam bolt
and nut per
bracket.
Silicone
External Finish - Joints
Ensure joints are clear then seal the external joints
between panels by applying mastic with the gun
provided. Cut the nozzle of the cartridge so that a
bead of approximately 1/4” (6mm) is delivered.
After applying to the outside of all joints press
finishing granules into the surface of the mastic.
Where, as an optional extra, the outside walls are
to be separately finished with a textured weather
coating
Do Not
apply a mastic filling.
NOTE
: Where guttering is fitted, before
securing the roof sheets lay the felt strip
provided along the top edge of the rear wall panels
so that half the width of the felt drapes into the
gutter.
Silicone all internal joints with clear silicone as detailed above.
