Lenze IE3 g500-B, Project Planning Manual

Page: 27 / 120

Drive dimensioning
In order to carry out an accurate drive dimensioning process, you can use our configuring
software, the »Drive Solution Designer«.
With the «Drive Solution Designer«, you can design the drive both quickly and to a high
quality. The software contains profound and proven expertise with regard to drive applications
and mechatronic drive components.
Please get in touch with your Lenze representative.
Operation chart
Mains operation Inverter operation
Check operating conditions
Define required input variables
Determine correction factor
Operating modes and operating time
Ambient temperature and installation height
Determine gearbox type and efficiency
Determine product on the basis of the active forces
Calculate required drive power
Calculate adjustment range
Determine the rated point
Blower required?
Define load class and intensity
Determine application factor “k” from diagram
Select the product on the basis of the data obtained from the selection tables
Final configuration
Check operating conditions
Check
Approvals
Conformities
Supply voltage
Degree of protection
Ambient temperature
Surface protection
4
Standards and operating conditions
^
40
4
Surface and corrosion protection
^
32
Information on project planning
Drive dimensioning
27