Product description
Identification
3
l
44
BA_DVIUSB DE/EN 5.0
3.3
Identification
107AT12345
107AT12345
Lenze Automation GmbH
D-40667 Meerbusch
certified
P/N
L
File Exxxxxx
R
C
U
US
14ZZ
LISTED
IND. CONT. EQ.
DVIUSB−012
Type designation
Type code / order number
Technical data
Hardware / Firmware version
Material number (customer−specific)
Serial number as bar code
Manufacturer address
Certification
Sign of inspector
3.4
Application as directed
The TX−V4 DVI/USB transmitter and RX−V4 DVI/USB receiver are used as
directed if they are both used exclusively to set up a visualisation and control
solution between a computer unit (IPC) and a Lenze monitor panel (MP 800 DVI
... MP 9000 DVI or CS 5000 DVI ... CS 9000 DVI) and if the specifications of this
documentation are observed. Any other use is not permissible.
)
Note!
V4 series components are incompatible with V3 series components
(previous version). Therefore, a V4 series transmitter/receiver must
not be connected to a V3 series receiver/transmitter.
Unauthorised application
also includes purposes that bear fatal risks or dangers
which may lead to death, injuries, or damages to material assets if no
exceptionally high safety measures are taken.
