Braking operation
Braking operation with external brake resistor
Rating for Lenze brake resistors
8
99
EDS84ABD302 EN 4.0
8.3.4
Rating for Lenze brake resistors
To decelerate greater moments of inertia or with a longer operation in generator mode an
external brake resistor is required. It converts braking energy into heat.
The brake resistors (IP20) recommended in the table are designed for a 1.5-fold
regenerative power. The cycle time is 150 s and contains a maximum braking time of 15 s
and a minimum recovery time (break) of 135 s.
ƒ
The brake resistors are equipped with a thermostat (potential-free NC contact,
switching capacity: AC 250 V, 0.5 A).
ƒ
To increase the power, brake resistors can be connected in parallel or in series.
– The resistance for the controller must not fall below the lowest permissible value.
– The thermostat of several brake resistors at a controller must always be connected
in series.
Product key
Rated data - brake resistor
Controller
Brake resistor
Resistor
R [
Ω
]
Continuous power
P [W]
Thermal capacity
WK [kWs]
E84AVBxx3714
ERBM390R100W
390
100
15
E84AVBxx5514
ERBM390R100W
E84AVBxx7514
E84AVBxx1124
ERBP180R200W
180
200
30
E84AVBxx1524
ERBP180R200W
E84AVBxx2224
ERBP180R300W
300
45
E84AVBxx3024
ERBP180R300W
100
300
45
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]