2
Locomotive decoder LE104XF
DIGITAL plus
What can LW120 do:
Use as a turnout throwing module:
A pair of keys or a single key in connection with a group key
directly throws a turnout, sets a signal, activates an uncoupler or
other device.
What can LW120 do in the future:
Use as train path module:
Pressing a single key calls up a switching chain on the tower cab.
This option is of special interest for setting multi-display signals.
Use as start-goal module:
Two keys are pressed after each other; the first key is the “start”
key, the second is the “goal” key. This key combination then calls
up the associated switching chain in the tower cab. In this setup,
any key can be both start and goal key. The logic always
evaluates the key pressed first as the “start” one and the following
key as the “goal” one.
Installation
LW120 has 4 holes for installation using the included screws. Use
the plastic tubes as spacers. Make sure that you do not damage or
bend any components when attaching the module. If you use
screws different from the ones included, please ensure that the
maximum diameter of 3mm (1/8”) is not exceeded. Similarly, the
screw heads must not touch traces or components on the circuit
board.
