4
Locomotive decoder LE104XF
DIGITAL plus
You want to throw turnouts 33 to 48 from the key module, you
program the DIP-switch as follows:
1
2
3
4
Turnout from-to
0 1 0 0
33-48
Input 1 of the key module (in the picture to the
right next to the two “PLUS” terminals)
activates turnout address 33, input 2 address
34 and so on to input 16 that activates turnout
address 48.
Connecting keys
There are two different possibilities here, differing in operation and
the number of keys needed.
Version 1:
You use one pair of keys for each magnetic device. You press one
key for “diverge” (“stop”), the other for “straight” (“Go”).
Refer to the wiring example in the picture below for this version.
The example shows wiring of connections 1 and 4 of LW120. 2
keys each (in boxes) serve the setting of a magnetic device.
Example:
The key-module is programmed for turnout addresses 33 to 48.
Now when you press the left key T/S 1, this activates the “+”
terminal of output 1 of the LS100/110 programmed for turnout
addresses 33 to 36.
