manualshive.com logo in svg

Lenz digital plus LI101F, Manual

Share
Download
Lenz digital plus LI101F Manual Download Page 9

Information LI101F

Page 9

 

Setting the XpressNet address of the LI101F

The interface has an XpressNet (XBUS) address, just like any other Digital
plus input device. This is the address used by the command station to call
up the interface. Ex-works, the interface is set to address 30.

If you want to alter the address set in the interface, simply click on the
arrow pointing downwards next to the display "New Address". A drop-down
list showing the XpressNet addresses which are permitted will open up.

Picture 3: Selecting the XpressNet address

Select the desired new address by clicking on it. Please note that each
XpressNet address may only be used once (address 29 is reserved for the
transmission module LC100. Use this address only if you are not using an
LC100)!

When you have set the new XpressNet address, the button "Write" will
appear next to the button "Read". Click on the button "Write" to enter the
new XpressNet address into the LI101F. Afterwards, the LI101F data will
be reread and checked.

Summary of Contents for digital plus LI101F














Reviews:

No comments

Brands by name

Popular brands

Load more brands