Information LI101F
Page 6
Installing the software
1. Insert the enclosed data medium "Information and software for
LI101F" into your floppy disk or CD-ROM drive.
2. Click on "Start" and then "Execute".
3. Enter:
"D:\LI101F\LI101F_SETUP.EXE "
(If necessary, replace the letter “D“ of the drive with a letter valid for your
computer). The setup program is started and installs the program “LI101F
Tool". Simply follow the instructions shown on the screen.
After successful setup you will find a
new icon on your desktop:
Double-click on this icon to start the
LI101F Tool.
The program "LI101F Tool"
The LI101F Tool serves to check the communication between your PC
and the digital system.
When the program is started, the PC will immediately try to communicate
with the
Digital plus by Lenz
®
command station via the interface. The
program assumes that the interface is connected to COM1 of your PC. (If
you have selected a different free RS232 port, you should first set the
used COM port in the program. Please see "Selecting the COM port" for
further details).
If the connection has been established correctly and you are using COM1
of your PC, the program window will display the relevant information of the
Digital plus by Lenz
®
system being used and the interface:
