Information LI101F
Page 4
Connecting the interface
Switch off both your
Digital plus by Lenz
®
system as well as your
computer before connecting your interface!
Only use the cables enclosed with the interface for the connection.
Connection to the XpressNet
Use this cable enclosed in the delivery for
connecting the XpressNet.
Plug one end into the socket "XpressNet" of
the LI101F; connect the other end to an
adapter LA152. The LY006 cable (purchased
separetly) can be used of you desire to plug
the LI101F into a Din Pug
If you wish to connect the LI101F with the
terminal screws LMAB of a LZ100 or LZV100,
simply cut the cable in the middle and
connect the cable wires with the
corresponding terminal screws of the LZ100
or LZV100. The pin assignment is shown in
the illustration on the right.
don't use
don't use
Connection to the computer
For the operation of the LI101F your computer requires a free RS232 port.
Use the connecting cable for the RS232 interface to connect the LI101F to
your computer. Use an adapter plug (purchased separetly) if your
computer has a 25-pin connection at the RS232 interface.
Important advice!
Make sure that you do not create other electrical connections
between the computer and the model railway layout apart from
those via
the LI101F. Otherwise you might damage the
components used in which case all guarantees will become
invalid!
