32
Information Silver mini
control points up.
1
interchanged: locomotive drives forward if the arrow on the
manual control points down.
2 (1)
Running-notches mode:
0
Operation with 14 or 27 running notches.
This setting is chosen for digital systems which do not
support the 28 running-notches mode.
1
1
Operation with 28 or 128 running notches.
This setting is chosen for digital systems which support the
28/128 running-notches mode.
3 (2)
Operational mode:
0
Locomotive only runs in digital operation.
1
Locomotive runs both in digital and conventional operation,
flying splice possible.
1
4 (3)
Not used
0
5 (4)
0
factory pre-set speed curve is used
1
User defined speed curve is used
0
6 (5)
0
Decoder uses basic address (from CV1)
1
Decoder uses extended address (from CV17 and CV18)
0
7-8(6-7)
Not used
0
30
Bit
Fault display
0 (dec)
1 (0)
1
Light short-circuit
0
2 (1)
1
Overheating
0
3 (2)
1
Motor short-circuit
0
