- 15
device. Still, ensure adequate ventila-
tion, e.g. by opening the window.
• Place the appliance on a flat,
heat-resistant surface.
• Unwind the power cord with the
power plug completely and connect
the appliance to a properly installed
power outlet that corresponds to the
specifications on the device.
• Now carry out 1-2 approx. 5 minutes
of heating process (without ingredi-
ents). For this, follow the instructions
and warnings under “Using the
sandwich maker”.
• Then disconnect the appliance from
the mains by pulling the mains plug out
of the socket and let it cool down to
room temperature.
• Clean the appliance as described in
the Section “Cleaning and Care”
In addition, we recommend to do 1-2
baking cycles with dough, in order to
completely remove any production-re-
lated residues. These toast slices are
not suitable for consumption.
9. Use of Sandwich maker
WARNING!
• Parts and surfaces of the device
become hot during operation. Do not
touch the hot parts and surfaces of the
device.
• The housing cover is also heated,
when it is open. So be especially
careful in order to avoid burns and / or
property damage.
• Do not hold the handle during
baking process - there is a risk of injury
because of the escaping hot steam.
• Let the appliance cool completely
before cleaning or stowing it.
• Prepare the ingredients and place
them close to the device. Then
connect the appliance to the earthing
contact socket.
1. Place the appliance on a flat,
heat-resistant surface.
2. Unwind the power cord with the
power plug completely and connect
the appliance to a properly installed
power outlet that corresponds to the
specifications on the device.
3. The red operation indicator lamp (3)
and the green temperature indicator
lamp (4) light up. The appliance starts
heating up.
4. After the device has reached the
operating temperature, the green
temperature indicator light (4) goes
out. This indicates that the optimum
temperature has been reached.
5. The temperature control light (4) and
thus also the thermostat now turn on
and off during operation to maintain
the optimum temperature.
6. Unlock the locking clip and fully
open the housing cover.
EN
29015 ZM-206 Bedienungsanleitung.indd 15
29.03.19 14:09
