background image

 

 

23.

 

Do not insert fingers or allow foreign objects to enter any ventilation or exhaust opening as this may 
lead to an electric shock or fire, or may even damage the fireplace. 

24.

 

This  fireplace  becomes  hot  during  use.  To  avoid  burns,  do  not  let  bare  skin  touch  hot  surfaces.  If 
necessary, use the handles when moving this fireplace. 

25.

 

Use  this  fireplace  only  as  described  in  this  manual.  Any  other  uses  not  recommended  by  the 
manufacturer may cause fire, electric shock, or personal injury and may void warranty privileges. 

26.

 

Always  plug  fireplaces  directly  into  a  wall outlet.  Never  use  an extension  cord,  power strip,  surge 
protector,  multiple  outlet  adapter,  cord  reel  or  outlet-type  air  freshener.  The  use  of  such  devices 
creates a fire hazard. 

27.

 

Ensure the heater is not directly located under the wall outlet. 

28.

 

Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that the fireplace plug 
properly  fits  into  the  outlet  before  each  use.  During  use,  make  sure  the  fireplace  plug  does  not 
overheat. If necessary, have a qualified electrician check and / or replace the wall outlet. 

29.

 

Do not place the fireplace near a bed for objects such as pillows or blankets can fall off the bed

 

and

 

be ignited by the fireplace. 

30.

 

Do not immerse in water. 

31.

 

Never clean this fireplace while it is plugged in. To disconnect, turn control to OFF, then remove the 
plug  from  the  outlet.  Never  pull  the  cord.  Always  hold  the  plug  firmly  and  then  remove  from  the 
outlet. 

32.

 

This fireplace is intended for supplemental heat and  / or decorative  purposes. Continuous use  for 
several hours can impact the performance and life of the fireplace. 

33.

 

It is not intended to be used in commercial, industrial or agricultural settings. 

34.

 

Do not use outdoors. 

35.

 

Do not use the heater with a timer or separate remote-control system. 

36.

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory 
or mental capabilities, or lack of experience or knowledge, unless they have been given supervision 
or  instruction  concerning  use  of  the  appliance  by  a  person  responsible  for  their  safety.  Close 
supervision is necessary when the product is used by or near children or invalids. Children should be 
supervised to ensure that they do not play with the appliance. 

37.

 

This appliance is intended to be used in household and similar applications such as: 
-staff kitchen areas in shops, offices and other working environments; 
-farm houses; 
-by clients in hotels, motels and other residential type environments; 
-bed and breakfast type environments 

38.

 

Do not leave the heater running unattended. 

39.

 

Always disconnect the unit when moving it from one location to another. 

40.

 

The unit does not contain any serviceable parts inside. Do not attempt to open and repair the unit 
yourself. All components should only be serviced by a qualified technician. 

41.

 

Do not use the heater if the plug, power cable or heater itself is damaged. 

42.

 

If the power cord is damaged, you must have it replaced at a service centre with qualified persons in 
order to avoid a hazard.

 

43.

 

Tip over switch. There is a tip over switch in the base of the heater. If the heater is knocked over the 
power will be cut off automatically. 

 

 

 

Summary of Contents for PR3757








Reviews: