Lenovo ThinkSystem D3284 Hardware Installation And Maintenance Manual Download

Page: 43 / 159

Controller and expansion modules

This section describes the IOMs used in Lenovo ThinkSystem DS Series storage enclosures. They are

mechanically and electrically compliant to the latest SBB v2.1 specification.
The isometric rear orientation in

Figure 36

shows a frontal face plate view of a 4-port FC/iSCSI controller module

aligned for use in the top controller module slot located on the 2U enclosure rear panel.

Figure 36 Controller module – isometric rear orientation

NOTE:

Given that the 5U84 is configured as an EBOD, it does not support controller modules. Rather, it

supports the expansion module used by DS EXP enclosures. See

Figure 43 (page 52)

and

Figure 77 (page 115)

Each controller module maintains VPD (Vital Product Data) in EEPROM devices, and are interconnected by

SBB-defined I

C buses on the midplane. In this way, the SBB modules can discover the type and capabilities of the

partner SBB module(s), and vice versa, within the enclosure. An enclosure system alarm occurs when incompatible

configurations are detected.

12Gb/s controller module LEDs

The diagrams with tables that immediately follow provide descriptions for the different controller modules that can

be installed into the rear panel of a DS Series and DS EXP/D3284 controller enclosure. Showing controller

modules separately from the enclosure enables improved clarity in identifying the component items called out in

the diagrams and described in the companion tables within the figure/table ensembles. In each IOM diagram, the

controller module is oriented for insertion into the top IOM slot (A). When oriented for use in the bottom IOM slot

(B), the IOM labels appear upside down.

Summary of Contents for ThinkSystem D3284
































































































































































Search results

Summary of Contents for ThinkSystem D3284

Reviews:

Related manuals for ThinkSystem D3284

Brands by name

Popular brands

Lenovo ThinkSystem D3284, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for ThinkSystem D3284

Reviews:

Related manuals for ThinkSystem D3284

Brands by name

Popular brands