Lenovo ThinkSystem D3284 Page 15 Hardware Installation And Maintenance Manual Download

Page: 15 / 159

Document conventions and symbols

CAUTION:

Indicates that failure to follow directions could result in damage to equipment or data.

IMPORTANT:

Provides clarifying information or specific instructions.

NOTE:

Provides additional information.

TIP:

Provides helpful hints and shortcuts.

Table 2 Document conventions

Convention

Element

Colored

text

Cross-reference links

Black, underlined text

Email addresses

Colored, underlined

text

Website addresses

Bold

text

•

Keys that are pressed

•

Text entered into a GUI element, such as a box

•

GUI elements that are clicked or selected, such as menu and list items,

buttons, and check boxes

Italic

text

Text emphasis

Monospace

text

•

File and directory names

•

System output

•

Code

•

Commands, their arguments, and argument values

Monospace,

italic

text

•

Code variables

•

Command parameters

Monospace,

bold

text

Emphasis of file and directory names, system output, code, and text entered

at the command line

Summary of Contents for ThinkSystem D3284
































































































































































Search results

Summary of Contents for ThinkSystem D3284

Reviews:

Related manuals for ThinkSystem D3284

Brands by name

Popular brands

Lenovo ThinkSystem D3284, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for ThinkSystem D3284

Reviews:

Related manuals for ThinkSystem D3284

Brands by name

Popular brands