Lenovo ThinkSystem 1754-A1T User Manual Download Page 12

Page: 12 / 88

Safety

Statement 4

CAUTION: Use safe practices when lifting.

≥ 18 kg (39.7 lb)

≥ 32 kg (70.5 lb)

≥ 55 kg (121.2 lb)

Statement 5

CAUTION: The power control button on the device and the power switch on the power

supply do not turn off the electrical current supplied to the device. The device

also might have more than one power cord. To remove all electrical current

from the device, ensure that all power cords are disconnected from the power

source.

Statement 6

CAUTION: If you install a strain-relief bracket option over the end of the power cord that

is connected to the device, you must connect the other end of the power cord

to an easily accessible power source.

Summary of Contents for ThinkSystem 1754-A1T

























































































Search results

Summary of Contents for ThinkSystem 1754-A1T

Reviews:

Related manuals for ThinkSystem 1754-A1T

Brands by name

Popular brands

Lenovo ThinkSystem 1754-A1T, User Manual

Search results

Summary of Contents for ThinkSystem 1754-A1T

Reviews:

Related manuals for ThinkSystem 1754-A1T

Brands by name

Popular brands