Diagnostic Error Code
FRU/Action
025-198-XXX
IDE interface test aborted
1.
If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 51
2.
Flash the system and re-test. See “Flash
update procedures” on page 251
3.
Go to “Undetermined problems” on page
91
025-199-XXX
IDE interface test failed, cause unknown
1.
Go to “Undetermined problems” on page
91
2.
Flash the system and re-test. See “Flash
update procedures” on page 251
3.
Replace component under function test
030-000-XXX
SCSI interface Test Passed
No action
030-00X-XXX
030-01X-XXX
SCSI interface failure
1.
SCSI signal cable
2.
Check power supply
3.
SCSI device
4.
SCSI adapter card, if installed
5.
System board
030-027-XXX
SCSI interface Configuration/Setup error
1.
SCSI signal cable
2.
Flash the system. See “Flash update
procedures” on page 251
3.
SCSI device
4.
SCSI adapter card, if installed
5.
System board
030-03X-XXX
030-04X-XXX
SCSI interface error
1.
SCSI signal cable
2.
Check power supply
3.
SCSI device
4.
SCSI adapter card, if installed
5.
System board
030-195-XXX
SCSI interface Test aborted by user
Information only
Re-start the test, if necessary
030-196-XXX
SCSI interface test halt, error threshold
exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
030-197-XXX
SCSI interface test warning
1.
Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 51
2.
Re-run test
3.
Replace the component that is called out
in warning statement
4.
Replace the component under test
78
Hardware Maintenance Manual
Summary of Contents for ThinkStation S20
