Lenovo ThinkStation E32, User Manual, Page: 94 / 172

8. Insert the two plastic tabs in the new power switch through the hole on the chassis, and then press the
power switch as shown until it snaps into position.
Figure 88. Installing the new power switch
9. Reconnect the power switch cable to the system board. See “Locating parts on the system board”
on page 12.
10. Reinstall the front bezel. See “Removing and reinstalling the front bezel” on page 32.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 93.
Replacing the Wi-Fi units
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.
This section provides instructions on how to replace the Wi-Fi units. The Wi-Fi units include a Wi-Fi adapter
card, a Wi-Fi card module, and a rear Wi-Fi antenna cable.
Replacing the Wi-Fi units involves the following operations:
• “Removing the Wi-Fi adapter card” on page 82
• “Removing the Wi-Fi card module” on page 84
• “Installing the Wi-Fi units” on page 85
Removing the Wi-Fi adapter card
To remove a Wi-Fi adapter card, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 32.
82
ThinkStation E32 User Guide