Lenovo ThinkStation E32, User Manual, Page: 45 / 172

This section provides instructions on how to remove and reinstall the front bezel.
To remove and reinstall the front bezel, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See “Removing the computer cover” on page 32.
3. Remove the front bezel by releasing the three plastic tabs on the top of the front bezel and pivoting the
front bezel outward to remove it from the computer.
Figure 11. Removing the front bezel
4. To reinstall the front bezel, align the other three plastic tabs on the bottom of the front bezel with the
corresponding holes in the chassis, then pivot the front bezel inward until it snaps into position.
Figure 12. Reinstalling the front bezel
What to do next:
• To work with another piece of hardware, go to the appropriate section.
Chapter 5
.
Installing or replacing hardware
33