Lenovo ThinkServer RS140, Operating System Installation Manual

Page: 24 / 44

8. Browse to the folder where the driver is stored, and click OK . The “Select the driver to be installed”
window is displayed.
9. Select the driver you want to install and click Next .
10. In the “Where do you want to install Windows” window, click Drive options(advanced) .
11. Select the hard disk drive on which you want to install the operating system and click New .
12. Type the amount of space (in MB), and then click Apply .
13. Ensure the drive partition is correct and click Next . The installation begins.
Notes:
• The drive partition must be greater than 80 GB. It is recommended that the drive partition is greater
than 120 GB.
• Your server will restart several times during the installation.
14. In the Continue Installation window, select Clean Install . Then, click Next .
15. Click Open Date and Time to verify the clock and time zone settings to set your date and time, and
click OK . Then, click Next .
Note: If the server can identify the Ethernet card, go to Step 23.
16. When “A network adapter was not found” window is displayed, connect the USB storage device that
contains the driver for the Ethernet card to your server.
17. Press Shift+F10, input the command
devmgmt.msc
, and press Enter. The Device Manager window is
displayed.
18. Click other devices , and then right-click Ethernet Controller .
19. Click Update Driver Software...
➙
Browse my computer for driver software .
20. Browse to the folder where the driver is stored, and then click Next .
21. In the Update Driver Software-Intel... Connection window, click Close . Go back to the command
window and close it.
22. In the “A network adapter was not found” window, click Back to return to the “Verify the clock and
time zone settings” window. Then, click Next .
23. In the “Server network configuration” window, configure the network settings as you need. Then,
click Next .
24. In the Get important updates window, select the update method depending on your need. The following
steps are based on the scenario that Do not get the most recent installation updates is selected
in this step.
25. In the Connecting your server window, configure the company information and click Next .
26. Personalize the server and network information depending on your need. Then, click Next .
27. In the “Add a network administrator account” window, set your user name and password. Then, click
Next .
Note: The password must contain at least eight characters, and consist of uppercase letters, lowercase
letters, and digits.
28. Click Next . The server will restart.
29. When the “Expanding and installing files” window is displayed, the server will install files automatically.
Your server will restart several times.
30. When the “Installation finished” (or “Successful installation” in UEFI mode) window is displayed, the
installation is completed.
20
ThinkServer RS140 Operating System Installation Guide