Lenovo ThinkServer 1098, Hardware Maintenance Manual

Page: 63 / 130

7. Carefully pull on the tips of the rubber mounts until the new rear fan assembly is secured in place.
Figure 33. Installing the rear fan assembly
8. Connect the new rear fan assembly cable to the system fan connector on the system board. See
“Locating parts on the system board” on page 26.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 66.
Replacing the microprocessor
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the documentation DVD that came with your product, and “Guidelines” on page
29. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to replace the microprocessor.
CAUTION:
The heat sink and microprocessor might be very hot. Turn off the computer and wait three to five
minutes to let the computer cool before removing the computer cover.
Chapter 5
.
Replacing FRUs
59