Lenovo ThinkServer 1098, Hardware Maintenance Manual

Page: 23 / 130

POST error code POST error message Description/Action
0176
System security - The system has been
tampered with
This error message is displayed when the
computer is turned on with the cover open or
removed.
Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
0189 System security - Can not read the
Security EEPROM This error message indicates that the Security
EEPROM might be broken or have been removed.
Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
0197 System security - Unauthorized security
data change detected Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
0190 System security - Invalid security change
requested Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
0199
System security - Security password retry
count exceeded Press F1 to enter the Setup Utility program. Then
press F10 to save the operation and exit the Setup
Utility program.
EasyStartup problems
The following table describes the EasyStartup problems and provides suggested actions to correct detected
problems.
Table 2. ThinkServer EasyStartup DVD
Follow the suggested actions in the order in which they are listed in the Action column until the problem
is resolved.
Symptom
Action
The ThinkServer
EasyStartup DVD will
not start.
• Make sure the server supports the EasyStartup program and has a startable (bootable)
DVD drive.
• If the startup (boot) sequence settings have been changed, make sure the DVD drive
is first in the startup sequence.
• If more than one DVD drive is installed, make sure that only one DVD drive is set as the
primary drive. Start the EasyStartup DVD from the primary DVD drive.
The operating system
installation program
continuously loops. Make more space available on the hard disk drive.
The EasyStartup
program will not start
the operating system
medium. Make sure that the operating system medium is supported by the EasyStartup program.
See the
EasyStartup User Guide for a list of supported operating system versions. The
EasyStartup User Guide and compatibility notes are available through the EasyStartup
program.
Chapter 3
.
Diagnostics and troubleshooting
19