Lenovo ThinkServer 1098, Hardware Maintenance Manual

Page: 28 / 130

Table 3. Front control panel LEDs
LED State Color Description
On Green
The server power is on.
Blinking Green The server power is in ACPI S1 mode, which is also
known as Power On Suspend (POS) mode. In this mode,
the microprocessor is not working while other hardware
devices are still working.
Power LED
Off Off
The server power is off.
Off Off The hard disk drive is not active. Hard disk drive
LED
Blinking Green The hard disk drive is active.
Rear view
Figure 2 “Rear connector locations” on page 24 shows the locations of the connectors on the rear of
your server. Some connectors on the rear of your server are color-coded to help you determine where to
connect the cables in your server.
Figure 2. Rear connector locations
1
Power cord connector
7
Microphone connector
2
Serial port
8
Audio line-out connector
3
VGA monitor connector
9
Audio line-in connector
4
DisplayPort connector
10
PCI Express x16 card slot
5
USB connectors (6)
11
PCI Express x1 card slot
6
Ethernet connector
12
PCI card slots (2)
24
ThinkServer TS130 Hardware Maintenance Manual