Lenovo ThinkPad X1 Carbon 20HQ Hardware Maintenance Manual Download Page 34

Page: 34 / 110

2. Perform operational charging. Click the battery status icon in the Windows notification area to display

detailed battery information. If it indicates that the battery is not charging, replace the battery.

3. Check the battery status again. If the same error still exists, replace the system board.

Checking the coin-cell battery

To check the coin-cell battery, do the following:

1. Disable the built-in battery. See “Disabling the built-in battery” on page 68.

2. Remove the coin-cell battery. See “1190 System board assembly” on page 90.

3. Measure the voltage of the coin-cell battery. See the following illustration.

Wire

Voltage (V dc)

Red

+2.5 to +3.2

Black

Ground

• If the voltage is correct, replace the system board.
• If the voltage is not correct, replace the coin-cell battery.
• If the coin-cell battery discharges quickly after replacement, replace the system board.

Hardware Maintenance Manual

Summary of Contents for ThinkPad X1 Carbon 20HQ















































































































Search results

Summary of Contents for ThinkPad X1 Carbon 20HQ

Reviews:

Related manuals for ThinkPad X1 Carbon 20HQ

Brands by name

Popular brands

Lenovo ThinkPad X1 Carbon 20HQ, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkPad X1 Carbon 20HQ

Reviews:

Related manuals for ThinkPad X1 Carbon 20HQ

Brands by name

Popular brands