Lenovo ThinkPad T495 Hardware Maintenance Manual Download Page 60

Page: 60 / 109

System board connectors and cables

Table 10. System board connector and cable guide

Item

Connector (location)

Internal cable required

Cable connection

Camera/LED connector (internal)

Camera/LED cable

Connect one end of the cable to
the camera/mic combo board and
the other end to this connector.

Power button board connector
(internal)

Power button board cable

The power button board comes
with the cable. Connect the cable
to this connector.

RJ45 board connector (internal)

RJ45 cable

Connect one end of the RJ45
cable to the RJ45 board and the
other end to this connector.

Wireless-LAN card slot (internal)

Insert the wireless-LAN card into
this slot.

Speaker assembly connector
(internal)

Speaker assembly cable

The speaker assembly comes with
cable. Connect the cable to this
connector.

LCD connector (internal)

LCD cable

Connect one end of the LCD cable
to the LCD panel and the other end
to this connector.

Wireless-WAN card slot (internal)

Insert the wireless-WAN card into
this slot.

T495 Hardware Maintenance Manual

Summary of Contents for ThinkPad T495














































































































Search results

Summary of Contents for ThinkPad T495

Reviews:

Related manuals for ThinkPad T495

Brands by name

Popular brands

Lenovo ThinkPad T495, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkPad T495

Reviews:

Related manuals for ThinkPad T495

Brands by name

Popular brands