9.
Click [Next] to continue
10.
Click “Display list of all the Driver…”
11.
Select “Crystal Sound Fusion [6-8-2000]”
12.
Click [Next]
13.
Click [Next] to confirm
14.
New Hardware Found wizard will be detected and will install the necessary devices
15.
Click [Finish] to finish upgrade process
To upgrade Audio (Crystal SoundFusion) to Windows Me built-in driver (ThinkPad models
600 and 600E)
Note: During upgrade, you will observe yellow bang on some audio devices and new devices will
be listed. Once all audio devices are upgrade, the yellow bang will disappear. It is also
recommended to reboot the system even though it will not be prompted.
1.
Turn on your computer and logon to Windows Me.
2.
Click
Start
→
Settings
→
Control Panel
3.
Double-click
System
icon and click ‘Device Manager’ tab.
4.
Click [+] “Sound, Video and Game Controller” to expend the devices
5.
Select “Crystal PnP Audio system CODEC” and click [Properties]
6.
Click “Driver” tab.
7.
Click “Update Driver”
8.
Click “Specify the location of the driver (Advanced)”
9.
Click [Next] to continue
10.
Click “Display a list of all the driver in a specific location….”
11.
Click [Next]
12.
Click “Display list of all the Driver…”
13.
Select the driver with most recent date stamp such as “Crystal WDM Audio CODEC [6-
8-2000]”
14.
Click [Next] for next two times to continue
15.
Once all the files are copied, click [Finish]
16.
Click [Close]. Note: Some Audio Device will appear with a yellow bang. Reboot the
system before continuing to upgrade the next device. After reboot, the yellow bang will
disappear.
17.
Repeat the steps from 5 to 16 for the following device sequentially.
•
Crystal PnP Audio System Control Registers
•
Crystal PnP Audio System Joystick (select “Gameport Joystick [6-8-2000]”)
•
Crystal PnP Audio System MPU-401 Compatible
•
Crystal SoundFusion (tm) PCI Audio Accelerator (600E Only)
18.
Once all Devices are update, reboot the system.
