2651-542/562/592
i Series 1200/1300
1161-
21x/23x/25x/26x
1171-
31x/32x/34x/35x/33
x/37x
-
IBM
IBM
IBM
-
-
T20
-
IBM
-
-
IBM
IBM
A20m
-
IBM
-
-
IBM
IBM
A20p
-
IBM
-
-
IBM
IBM
X20
-
IBM
IBM
IBM
IBM
Step 2
: Install the Device Drivers in the following
sequential
order for a successful install for all
the device drivers that apply to your system. Note: Installation guide is included when the drivers
are obtained from IBM Web site.
1.
Windows Me Supplement File
2.
Video driver
3.
Audio driver
4.
Modem driver (Refer to the following section for installation guide)
5.
Bay Swap Driver
6.
IBM PM driver
Step 3
: Install the remaining drivers and applications from Chart 1 to complete Windows Me
setup for your system. For the DVDExpress, follow the instructions in the following section.
Now setup ends.
To install ThinkPad ACP Modem Driver for 600 & 600E
1.
Start your computer, and then logon to Windows Me.
2.
Insert Windows Me CD to the CD-ROM/DVD-ROM drive.
3.
If Windows automatically detects the CD, the Windows Me Setup wizard will prompt
the user to begin the upgrade process. Click [No].
4.
Click
Start
→
Settings
→
Control Panel
5.
Double-click
System
icon and click “Device Manager” tab
6.
Double-click “Unknown Device” to install driver.
7.
Click “Specify the location of the driver (Advanced) and Click “Display a list of all the
drivers in a specific location, so you can select the driver you want”
8.
Click [Have Disk] and provide the following path e:\driver\modem\ibm\disk1. “e” is the
driver letter for CD-ROM/DVD-ROM and click [OK]
9.
Select “ThinkPad Digital Signal Processor” in the list and click [Next]
10.
When prompt for Disk 2, type the following e:\driver\modem\ibm\disk2.
11.
When all files are copied, click [Finish] to complete the setup.
To Install DVDExpress on your ThinkPad for Windows Me
Require two-step installation.
